Image 1

RFID Backlit Access Control Keypad 1,000 User Codes Capacity

Your Price:
$139.99 (You save $36.00)
Calculated at checkout
Product Videos
Also Viewed
By Category
Other Details
  • Product Description

    The EVKP2822ID RFID keypad includes a full range of features in a compact design, and with our many Menu options, it can be part of a customized access control system for doors and gates.

    This is a digital keypad and proximity RFID EM card reader with a dual relay output keypad. For durability, keypad buttons are epoxy-coated silicone rubber, an ideal choice for high-traffic access control installations. The EVKP2822ID RFID keypad works by itself or as part of a larger system available from Entry Vision. It includes a card reader with 26-bit Wiegand data output for EM cards and 34-bit output with PIN/User codes. The Wiegand data is usable by large system integrator or by end users.

    The EVKP2822ID is an excellent choice for door strike and alarm arm/disarm control. When programmed as an industrial timer in automatic operator systems with timing increments from one second to 24 hours. Output 1 and Output 2 are dual relays, each with N.C. and N.O. output contacts.


    The Keypad includes

    1. Access Control keypad.
    2. Installation Accessories.
    3. 2 RFID cards.


    Features of the EVKP2822ID RFID Access Control Keypad

    This multi-function, high-performance card reader/timer includes the following features:

    • 1,100-capacity PIN and/or EM card users
    • Backlit keyboard protected with epoxy-coated silicone rubber for weather-resistant, high-use durability
    • Surface-mount, tough plastic housing with a stainless steel faceplate
    • Can be surface mounted if preferred by using a gang box
    • Output 2 & output 2 are dual relay for controlling remote door locks
    • More than 24 hours of programmable timing suitable for industrial control applications
    • Data I/O port is built into the design and expandable for split-decoded function
    • Self-contained or split-decoded keypad
    • Keypad includes Wiegand 26-bit card reader and 34-bit PIN/user code data output
    • Dimensions: L-4 5/8 x W-2 7/8 x D-1 5/8 inches


    EVKP2822ID Card Reader Access Control Keypad Components

    • One (1) EVKP2822ID keypad
    • Two (2) EM cards
    • One (1) Set of mounting screws
    • One (1) Six-wire wiring harness
    • One (1) Manual for installation, programming and operation


    Options for the EVKP2822ID RFID Keypad Reader

    Our equipment Menu gives you options for expanding this system. These include:

    • Additional key fobs
    • Additional EM cards
    • Additional system components
    • Simply select the option or options you want from the Menu, and they will be added to your order


    Advanced Performance Features of the EVKP2822ID RFID Card Reader Keypad

    • Stand-alone or split-decoded functionality
    • Stand-alone lock or inter-lock installation
    • Output 1 – 1,000 PINs/Cards plus 50 duress codes
    • Output 1 – 50 Visitor codes that can be programmed for one-time use or valid from 1 to 99 hours
    • Output 2 – 100 PINs/Cards plus 10 duress codes
    • More than 100 million potential user PIN combinations
    • Super User (administrator) codes for Outputs 1 & 2 with Operation Inhibit and Reset Inhibit of Output 1
    • Sole Reader Mode delivers Wiegand data output for all PINs and card reading
    • Card reader supports all standard 125kHz proximity EM cards and key fobs
    • Intelligent egress button controls programmable for delay, warning, momentary and holding contact
    • Security enhancement of EM card use with addition of Common User PIN, Group User PINs and Private User PINs
    • On/Off selectable for Pacifier tone, Standby flashing LED and keyboard backlighting
    • Input terminals support Output 1 Inhibit Control, door position sensor and egress button
    • Open collector outputs for duress, alarm, key active, inter-lock & Output 2 – 100mA Sink / 24VDC maximum rating
    • Output Relay 1: N.C. & N.O. Dry Contacts, 5A / 24VDC Maximum
    • Output Relay 2: N.C. & N.O. Dry Contacts, 1A / 24VDC Maximum (Version A)
    • Tamper switch: N.C. dry contact – 50mA/24VDC
    • Timer programmable for Output relays 1 second to more than 24 hours
    • Operating voltage range: 12VDC nominal – 11-15VDC
    • Operating current: 50mA (quiescent) to 150mA (relay active)
    • Operating temperature range: -20C to +70C
    • Operating relative humidity range: non-condensing from 5% to 95%
    • Keyboard environment and ingress rating: All weather/IP-50
  • Product Reviews


    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category